• 3.8 oz./yd² (US), 6.3 oz./L yd (CA), 100% recycled polyester
• Hydrophilic finish
• Ribbed-knit collar
• Three-button placket
• Contrast heat-transfer logo on right sleeve
• The preferred decoration method is heat transfer due to the lightweight fabric
  • Embroidery decoration should be performed with the proper equipment on lightweight performance fabrications.  Proper stabilizing techniques and the correct hoops, backing, needles, and sewing threads are crucial to prevent damaging the garment.

This product meets the following Sustainable Style subcategory:

Sustainable Materials: contains 100% recycled polyester

• 4.3 oz./yd², 65/35 polyester/cotton
• 4.2 oz./yd², 100% polyester mesh back
• Tailored fit
• Powered by Touchtex™ technology: stain-resistant, wrinkle-resistant, and fade-resistant
• Moisture-management properties
• Mesh-lined banded collar with sewn-in stays
• Six concealed grippers
• Buttoned right chest pocket
• Left chest pocket
• Utility pocket on left sleeve

• 7.8 oz./yd², 89/11 polyester/spandex elastane
• Four-way stretch jersey knit fabric
• Moisture-management properties
• UPF 50 protection
• Cadet collar
• Utility pocket on left sleeve
• Contoured shoulder and sleeve hem
• Red Kap logo on opening of utility pocket

• 7.8 oz./yd², 89/11 polyester/spandex elastane
• Four-way stretch jersey knit fabric
• Moisture-management properties
• UPF 50 protection
• Cadet collar
• Utility pocket on left sleeve
• Contoured shoulder and sleeve hem
• Red Kap logo on opening of utility pocket

• 8 oz./yd², polyester softshell bonded to micro fleece
• Water and wind resistant
• 2" reflective tape
• ANSI/ISEA 107-2015 Type R Class 3 Certified

• 4.6 oz./yd² 65/35 Polyester/Cotton, Mechanical Stretch FLEX Twill
• Moisture-Wicking properties
• Wrinkle Resistant, Stain Release
• Banded collar with sewn in stays
• Hex chest pockets with pencil stall
• Industrial Laundry, Home Wash

Tall sizes available under style 05T 

• 3.5 oz./yd², 100% polyester two-layer, four-way stretch dewspo bonded to waterproof membrane
• 7 oz./yd², 100% polyester Sherpa Mountain Fleece lining
• 1 oz./yd², feather-touch polyfill insulation
• 1" channel quilt
• Storm Shield™ Level 2 for steady rain
• Teflon EcoElite™ C0 durable, water-repellent finish
• Standard fit
• Dual closure, snap placket with zig-zag stitching and heavy-duty zipper with easy-grab pull
• Adjustable hook and loop cuffs
• Straight hem with adjustable cord locks
• Exterior chest pocket with zipper closure
• Exterior hand pockets with snap closure

• 6.5 oz./yd², 81/13/6 polyester/cotton/elastane twill
• Coolcore® fabric that's cool to the touch
• Moisture-management properties
• Button closure
• Concealed stretch waistband
• Pocket on right leg
• Two back pockets
• UPF 50 protection

• 4.5 oz./yd², 94/6 polyester/Spandex stripe
• Relaxed fit
• Paragon Plus moisture and odor management
• Self-collar and hemmed sleeves
• Side vents

• 8 oz./yd²/270 gsm (US), 13.4 oz/L yd (CA), 100% polyester
• Polyester Interlock bonded to polyester birds eye with inner membrane
• 80 gsm poly fill
• Polyester taffeta lining with diamond quilting
• 3 layer bonded
• Water resistant
• Windsmart Technology with barrier for windy conditions
• UTK 1
• Metal snap closure at collar stand and welt pockets
• Center front dyed-to-match vislon zipper with autolock slider
• Back yoke with quilted paneling
• EZEM™ System for embroidery access

• 152 oz./yd² Tarpaulin
• Designed for rapid deployment of Oxygen and Airway equipment
• Ergonomic heavy-duty large top carry handle
• Large EZ-Pull pull bars for quick access
• Zippered internal compartments with clear view pockets
• Interior and exterior Infection Control Material allows for quick decontamination of pathogens and transmissible substances
• Module ready zippers allow extra modules to be affixed to the bag for additional storage capacity
• Dual external zippered pockets with clear view compartments
• All compartments have air dry capability
• Inner foam construction maintains shape and protects contents
• Ergonomic heavy-duty side resists water and wear
• Hideaway padded backpack straps distribute weight for maximum comfort
• Adjustable waist belt
• Durable bottom skid runners
• Accommodates up to a Jumbo D or MD O2 cylinder as well as taller all-in-one VIPR regulator systems
• Quick-pull two-panel access to O2
• Double-stitching on all stress points
• Includes one MERET branded patch
• Blank patches sold separately; medium 3" x 4 3/8" - MPBK10 (Black), MPF10 (Red)
• Modules and supplies shown are not included
• Item weight: 7.07 lbs.
  

• 13.92 oz./yd² Tarpaulin
• Quick-access front pocket for gloves or small supplies
• Fully paneled with laser-cut MOLLE to support optional modules and other compatible gear
• Black matte finish hardware
• Oversized YKK zippers for added durability
• Large EZ-Pull zipper pullers allow easy access
• Large slide-release buckle to quickly remove pack from belt
• Interior and exterior Infection Control Material allows for quick decontamination of pathogens and transmissible substances
• Dual large internal 7"x7" customizable panels with interwoven elastic loops
• Quick-access front pocket for gloves or small supplies
• Quick-reach access to critical care supplies
• Rigid drop-leg platform provides secure fit
• Double-stitching on all stress points
• Includes one MERET branded patch
• Includes one blank patch for customization (medium 3" x 4 3/8")
• Modules and supplies shown are not included
• Item weight: 1.10 lbs.
  

• 152 oz./yd² Tarpaulin
• Designed for rapid deployment of Oxygen and Airway equipment
• Ergonomic heavy-duty large top carry handle
• Large EZ-Pull pull bars for quick access
• Zippered internal compartments with clear view pockets
• Interior and exterior Infection Control Material allows for quick decontamination of pathogens and transmissible substances
• Module ready zippers allow extra modules to be affixed to the bag for additional storage capacity
• Dual external zippered pockets with clear view compartments
• All compartments have air dry capability
• Inner foam construction maintains shape and protects contents
• Ergonomic heavy-duty side resists water and wear
• Hideaway padded backpack straps distribute weight for maximum comfort
• Adjustable waist belt
• Durable bottom skid runners\
• Accommodates up to a Jumbo D or MD O2 cylinder as well as taller all-in-one VIPR regulator systems
• Quick-pull two-panel access to O2
• Double-stitching on all stress points
• Includes one MERET branded patch
• Blank patches sold separately; medium 3" x 4 3/8" - MPBK10 (Black), MPF10 (Red)
• Modules and supplies shown are not included
• Item weight: 7.07 lbs.
  

• 154.4 oz./yd² Tarpaulin
• Designed as a turnout gear bag for first responders or as an oversized gear bag
• Reinforced carry straps
• Extra wide opening to access gear
• Non-absorbing infection control construction can be easily wiped clean and decontaminated
• Black matte finish hardware
• Interior lockable personal pocket
• Exterior pockets
• Single padded shoulder strap
• Riveted bottom skid runners
• Double-stitching on all stress points
• Includes one MERET branded patch
• Includes one blank patch for customization (medium 3" x 4 3/8")
• Modules and supplies shown are not included
  
• Includes personal 24"x17"x6" carry tote bag
• Item weight: 7.02 lbs.
  

• 95.68 oz./yd² Tarpaulin
• Durable 1200 Denier coated TPE, water and stain resistant
• Fully paneled with laser-cut MOLLE to support optional modules and other compatible gear
• Double-stitching on all stress points
• Low profile carry-drag handles on top and sides
• Oversized YKK zippers
• Black matte finish hardware
• Lower zippered pockets for litters/IV solutions
• Drain hole bottom
• Hideaway padded backpack straps
• Adjustable sternum and waist belt
• Main pocket opens completely
• Loop tape lined main pocket for a variety of modules
• Four-point strap system attaches to vests, quick release buckles
• Combat Trauma storage can be used with Ballistic Armor Panel MBAP912
• Includes one MERET branded patch
• Blank patches sold separately; medium 3" x 4 3/8" - MPBK10 (Black), MPF10 (Red)
• Modules and supplies shown are not included
• Item weight: 4.08 lbs.

• 154.4 oz./yd² Tarpaulin
• Designed for rapid deployment of Oxygen and Airway equipment
• Ergonomic heavy-duty large top carry handle
• Large EZ-Pull pull bars for quick access
• Zippered internal compartments with clear view pockets
• Interior and exterior Infection Control Material allows for quick decontamination of pathogens and transmissible substances
• Module ready zippers allow extra modules to be affixed to the bag for additional storage capacity
• Dual external zippered pockets with clear view compartments
• All compartments have air dry capability
• Inner foam construction maintains shape and protects contents
• Ergonomic heavy-duty side resists water and wear
• Hideaway padded backpack straps distribute weight for maximum comfort
• Adjustable waist belt
• Durable bottom skid runners
• Accommodates up to a Jumbo D or MD O2 cylinder as well as taller all-in-one VIPR regulator systems
• Quick-pull two-panel access to O2
• Double-stitching on all stress points
• Includes one MERET branded patch
• Blank patches sold separately; medium 3" x 4 3/8" - MPBK10 (Black), MPF10 (Red)
• Modules and supplies shown are not included
• Item weight: 7.07 lbs.
  

• 148.96 oz./yd² Tarpaulin
• Designed for rapid deployment of Oxygen and Airway equipment
• Ergonomic heavy-duty large top carry handle
• Large EZ-Pull pull bars for quick access
• Zippered internal compartments with clear view pockets
• Interior and exterior Infection Control Material allows for quick decontamination of pathogens and transmissible substances
• Module ready zippers allow extra modules to be affixed to the bag for additional storage capacity
• Dual external zippered pockets with clear view compartments
• All compartments have air dry capability
• Inner foam construction maintains shape and protects contents
• Ergonomic heavy-duty side resists water and wear
• Hideaway padded backpack straps distribute weight for maximum comfort
• Adjustable waist belt
• Durable bottom skid runners
• Accommodates up to a Jumbo D or MD O2 cylinder as well as taller all-in-one VIPR regulator systems
• Quick-pull two-panel access to O2
• Double-stitching on all stress points
• Includes one MERET branded patch
• Blank patches sold separately; medium 3" x 4 3/8" - MPBK10 (Black), MPF10 (Red)
• Modules and supplies shown are not included
• Item weight: 7.07 lbs.
  

• 16 oz./yd² durable ripstop nylon
• Level IIIA concealable armor
• Special threat tested, multi-round protection
• NIJ standard 0108.01 threat protection
• Ballistic coverage: 9 x 12 inches
• Finished product dimensions: 10.1" x 13.1"
• Ultra-thin and lightweight design
• Easy care with a durable weatherproof cover
• Stitched and bound finished edge
• Semi-rigid structure
• Ideal for backpacks, briefcases and laptop bags
• Thickness 0.24 inches
• Item weight: 0.87 lbs.

• 9.76 oz./yd² Tarpaulin
• Designed to deploy first aid in a compact hands-free design
• Interior and exterior Infection Control Material allows for quick decontamination of pathogens and transmissible substances
• Elastic outer sleeves on top, sides and front to secure first aid accessories
• Interior pocket for additional supply storage
• Includes one MERET branded patch
• Blank patches sold separately; small 2" x 3" - SPBK10 (Black), SPF10 (Red)
• Supplies shown are not included
• Item weight: .11 oz

• 229.12 oz./yd² Tarpaulin
• Paneled with laser-cut MOLLE to support optional modules and other compatible gear
• Filed tested high-quality wheels, telescoping extension handle
• Comfort-grip carry handles on sides of bag
• YKK super tough zippers and pullers
• Customizable internal main compartment with SLIDERS system adjustability
• Center securing panel with three pockets
• Dual internal zippered mesh pockets
• All compartments have air dry capability
• Inner foam construction maintains shape and protects contents
• Two external pockets for quick access
• Metal matte black finished hardware
• Hideaway backpack strap harness system easily distributes weight for maximum comfort
• Includes two STICKIT STRIPS and one deep stuff pocket
• Includes one MERET branded patch, blank patches sold separately
• All other modules and supplies shown are not included
• Item weight: 10.03 lbs.
  

• 83.2 oz./yd² Tarpaulin
• Large laser-cut MOLLE panel for optional modules
• Double-stitching on all stress points
• Black matte finish hardware
• Front zipper pocket
• Exterior Infection Control Material allows for quick decontamination of pathogens and transmissible substances
• Low profile heavy-duty handles
• Three quick-grab handles and front release buckles for quick removal
• Large front shoulder release buckle
• Panels each have two pockets for larger supplies
• Four removable customizable supply panels
• Large internal compartment for dividers or internal modules
• Interwoven elastic straps for securing small supplies
• Rear pocket can be used for Ballistic Armor Panel MBAP912
• Includes one MERET branded patch
• Blank patches sold separately; medium 3" x 4 3/8" - MPBK10 (Black), MPF10 (Red)
• Extra modules and supplies shown are not included
• Item weight 3.12 lbs.

• 10.88 oz./yd² Tarpaulin
• Designed to deploy first aid in a compact hands-free design
• Interior and exterior Infection Control Material allows for quick decontamination of pathogens and transmissible substances
• Elastic outer sleeves on top, sides and front to secure first aid accessories
• Interior pocket for additional supply storage
• Includes one MERET branded patch
• Blank patches sold separately; small 2" x 3" - SPBK10 (Black), SPF10 (Red)
• Supplies shown are not included
• Item weight: .11 oz
  

• 8 oz./yd²/273 gsm (US), 13.4 oz/L yd (CA), 65/35 polyester/cotton twill
• 140 gsm poly fill
• Polyester taffeta lining with diamond quilting
• Water repellent
• UTK 1
• Double patch pockets with flaps and velcro closure
• Lower zippered pockets
• Inner storage pocket
• EZEM™ System for embroidery access

• 8 oz./yd²/270 gsm (US), 13.4 oz/L yd (CA), 100% polyester polyester Interlock bonded to polyester birds eye with inner membrane
• 80 gsm poly fill
• Polyester taffeta lining with diamond quilting
• 3 layer bonded
• Water resistant
• Windsmart Technology with barrier for windy conditions
• UTK 1
• Metal snap closures at collar stand, welt pockets and sleeve cuffs
• Center front dyed-to-match vislon zipper with autolock slider
• Back yoke with quilted paneling
• EZEM™ System for embroidery access

• 100% polyester pique
• Lightweight
• Moisture-management properties
• 3/4" bi-color braid
• Side notch construction
• Internal drawcord
• Short inseam 7"

• 100% polyester pique
• Lightweight
• Moisture-management properties
• 3/4" bi-color braid
• Outside jock label

• 100% polyester pique
• Lightweight
• Moisture-management properties
• 3/4" bi-color braid
• Outside jock tag

• 100% polyester pique
• Lightweight
• Moisture-management properties
• 3/4" bi-color braid
• Outside jock tag

• 100% polyester pique
• Lightweight
• Moisture-management properties
• 3/4" bi-color braid
• Side notch construction
• Internal drawcord
• Short 5" inseam